Thumela I-imeyili
Facebook
Twitter
I-Linkedin
I-YouTube
UF Membrane Module PVC Ultrafiltration Membrane Module UFc4040 RO izindlu
Izinhlelo zokusebenza
Ukukhiqizwa kwamanzi amaminerali, amanzi entwasahlobo, noma olunye uketshezi oluyinyumba.
Ukuphuza ukwelashwa kwamanzi ompompi, amanzi angaphezulu, amanzi omthombo kanye namanzi omfula.
Ukwelashwa kwangaphambili kwe-RO.
Ukwelashwa, ukugaywa kabusha kanye nokusetshenziswa kabusha kwamanzi angcolile ezimbonini.
Ukusebenza Kokuhlunga
Lo mkhiqizo ufakazelwa ukuthi unemiphumela yokuhlunga engezansi ngokwemibandela yesevisi yemithombo yamanzi ehlukene:
| Isithako | Umphumela |
| SS, Izinhlayiya > 1μm | Isilinganiso Sokususwa ≥ 99% |
| I-SDI | ≤3 |
| Amagciwane, Amagciwane | > 4 ilogi |
| I-Turbidity | |
| I-TOC | Isilinganiso sokususa: 0-25% |
*Idatha engaphezulu itholakala ngaphansi kwesimo sokuthi ukuthuthumela kwamanzi okuphakelayo kungu-
Amapharamitha womkhiqizo
Imingcele Yezobuchwepheshe
| Uhlobo Lokuhlunga | phendukezelwe |
| I-Membrane Material | I-PVC eshintshiwe |
| MWCO | 100K Dalton |
| Indawo yeMembrane | 3.8m2 |
| I-ID/OD ye-diaphragms | 1.0mm/1.8mm |
| Ubukhulu | Φ90mm*1016mm |
| Usayizi Wesixhumi | Φ19 mm |
Idatha Yohlelo Lokusebenza
| I-Pure Water Flux | 1,200L/H (0.15MPa, 25℃) |
| I-Flux eyakhelwe ngaphakathi | 35-100L/m2.hr (0.15MPa, 25℃) |
| Ingcindezi Yokusebenza Ephakanyisiwe | ≤ 0.2 MPa |
| Ubukhulu be-Transmembrane Pressure | 0.2 MPa |
| Izinga Lokushisa Eliphezulu Lokusebenza | 45℃ |
| PH Ububanzi | Ukusebenza: 4-10; Ukugeza: 2-12 |
| Imodi yokusebenza | I-cross-flow noma i-Dead-end |
Ukondla Izidingo Zamanzi
Ngaphambi kokuphakela amanzi, isihlungi sokuvikela esingu-
| I-Turbidity | ≤ 15 NTU |
| Amafutha & Amafutha | ≤ 2mg/L |
| SS | ≤ 20mg/L |
| Insimbi Ephelele | ≤ 1mg/L |
| I-Chlorine Esele Eqhubekayo | ≤ 5ppm |
| I-COD | Okuphakanyisiwe ≤ 500mg/L |
*Impahla ye-UF membrane iyipulasitiki ye-polymer organic, akumele kube khona noma yiziphi izincibilikisi zemvelo emanzini aluhlaza.
Amapharamitha Okusebenza
| Maximum Backwashing Pressure | 0.2 MPa |
| I-Backwashing Flow Rate | 100-150L/m2.hr |
| I-Backwashing Frequency | Njalo ngemizuzu engama-30-60. |
| Ubude besikhathi sokugeza emuva | 30-60s |
| Imvamisa ye-CEB | 0-4 izikhathi ngosuku |
| CEB Ubude besikhathi | 5-10 min. |
| Imvamisa ye-CIP | Njalo ezinyangeni ezingu-1-3 |
| Amakhemikhali Okugeza: | |
| Ukuvala inzalo | 15ppm Sodium Hypochlorite |
| Ukugeza Okungcolile Kwezinto Eziphilayo | 0.2% I-Sodium Hypochlorite + 0.1% I-Sodium Hydroxide |
| I-Inorganic Pollution Washing | 1-2% Citric Acid/0.2% Hydrochloric Acid |
Ingxenye Material
| Isakhi | Okubalulekile |
| I-membrane | I-PVC eshintshiwe |
| Ukubeka uphawu | Ama-Epoxy Resins |
| Izindlu | I-UPVC |