Special Price for Mbr Wastewater Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Membrane Technology , Mbr System , Ultrafiltration Water Filter , We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.

Special Price for Mbr Wastewater Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo Detail:

Product Overview

UFf225 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

Applications

Drinking water treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient	Effect
SS, Particles?> 1μm	Removal Rate?≥ 99%
SDI	≤ 3
Bacteria, Viruses	>?4 log
Turbidity	< 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description112

Technical Parameters:

Filtering?Type	Outside-in
Membrane?Material	Modified?PVDF
MWCO	200K Dalton
Membrane?Area	60m2
Membrane?ID/OD	0.8mm/1.3mm
Dimensions	Φ225mm*1860mm
Connector?Size	DN50

Application Data:

Pure?Water?Flux	12,000L/H?(0.15MPa, 25C)
Designed?Flux	40-120L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure	≤ 0.2MPa
Maximum?Transmembrane?Pressure	0.15MPa
Maximum?Backwashing?Pressure	0.15MPa
Air?Washing?Volume	0.1-0.15N m3/m2 .hr
Air?Washing?Pressure	≤ 0.1MPa
Maximum?Working?Temperature	45C
PH?Range	Working: 4-10; Washing: 2-12
Operating?Mode	Cross-flow?or?Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity	≤ 25NTU
Oil?&?Grease	≤?2mg/L
SS	≤ 20mg/L
Total?Iron	≤?1mg/L
Continuous?Residual?Chlorine	≤?5ppm
COD	Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Backwashing?Flow?Rate	100-150L/m2.hr
Backwashing?Frequency	Every?30-60min.
Backwashing?Duration	30-60s
CEB?Frequency	0-4?times per day
CEB?Duration	5-10min.
CIP?Frequency	Every 1-3 months
Washing?Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic?Pollution?Washing	0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing	1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material:

Component	Material
Membrane	Modified?PVDF
Sealing	Epoxy?Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

All we do is always associated with our tenet Customer first, Trust first, devoting on the food packaging and environmental protection for Special Price for Mbr Wastewater Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: California, California, Finland, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.

Cross Flow Filtration System