PriceList for Pvdf Uf Membrane - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo
PriceList for Pvdf Uf Membrane - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤?1 |
Specifications
Size
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Precision | 0.1 ?micron |
| Membrane?Area | 25m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane?(PU) |
| Housing | ABS |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | 30~60L/m2.h |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested?Operating?Pressure | 0~-35KPa |
| Maximum?backwashingPressure | 100KPa |
| Operating Mode | 9min?Operation+1min?Break/8min?Operaetion+2min Break |
| Blowing?Mode | Continuous Aeration |
| Aeration?Rate | 4m3/h.pc |
| Washing Period | Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
| Item | Value |
| PH?Range | 5~9 (washing: 2~12) |
| Particle?Size | <2mm, no?sharp?particles |
| Oil & Grease | ≤2mg/L |
| Hardness | ≤150mg/L |
Product detail pictures:
Related Product Guide:
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for PriceList for Pvdf Uf Membrane - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Bahamas, Cape Town, Vancouver, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Pag from Pakistan - 2017.10.27 12:12
Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
By Kristin from Angola - 2017.03.08 14:45
Products categories
-
New Fashion Design for Mbr Technology - UF Mem...
-
2022 High quality Ultrafiltration Water Purifie...
-
High Quality Ultra Filtrate - UF Membrane Modu...
-
Factory wholesale Ultrafiltration Tube - MBR M...
-
Cheap price Membrane Toray - UF Membrane Modul...
-
Personlized Products Tubular Membrane Module -...