PriceList for Membrane Pressure - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo
PriceList for Membrane Pressure - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering?Direction | Outside-in |
| Membrane?Material | Reinforced?Modified?PVDF |
| Precision | 0.03 ?micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Component Material
| Component | Material |
| Hollow?Fiber?Membrane | Reinforced?Modified?PVDF |
| Sealing Compound | Epoxy?Resins?+?Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH?Range | 5-9 (2- 12 when?washing) | Neutral?PH?is?better?for?bacterial?culture |
| Particle?Diameter | <2mm | Prevent?sharp?particles?to?scratch?membrane |
| Oil?&?Grease | ≤2mg/L | Prevent?membrane?fouling/sharp?flux?decrease |
| Hardness | ≤150mg/L | Prevent?membrane?scaling |
Application Parameters
| Designed?Flux | 15~40L/m2.h |
| Backwashing?Flux | Twice?the?designed?flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | Continuous?opeartion, intermittent?backwashing?air?flushing |
| Blowing?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months
(Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule) |
Product detail pictures:
Related Product Guide:
Sticking towards the principle of Super High-quality, Satisfactory service ,We've been striving to become a superb business partner of you for PriceList for Membrane Pressure - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Bulgaria, Panama, USA, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.
By Julie from moldova - 2018.06.30 17:29
It is really lucky to meet such a good supplier, this is our satisfied cooperation, I think we will work again!
By Chris from Romania - 2017.06.22 12:49
Write your message here and send it to us
