Factory wholesale Ultrafiltration Tube - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo
Factory wholesale Ultrafiltration Tube - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤?1 |
Specifications
Size
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Precision | 0.1 ?micron |
| Membrane?Area | 25m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane?(PU) |
| Housing | ABS |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | 30~60L/m2.h |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested?Operating?Pressure | 0~-35KPa |
| Maximum?backwashingPressure | 100KPa |
| Operating Mode | 9min?Operation+1min?Break/8min?Operaetion+2min Break |
| Blowing?Mode | Continuous Aeration |
| Aeration?Rate | 4m3/h.pc |
| Washing Period | Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
| Item | Value |
| PH?Range | 5~9 (washing: 2~12) |
| Particle?Size | <2mm, no?sharp?particles |
| Oil & Grease | ≤2mg/L |
| Hardness | ≤150mg/L |
Product detail pictures:
Related Product Guide:
It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our great reward. We're hunting forward to your check out for joint development for Factory wholesale Ultrafiltration Tube - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Moldova, Spain, Comoros, we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.
By Wendy from El Salvador - 2018.11.04 10:32
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Danny from Riyadh - 2018.09.29 17:23
Products categories
-
High Quality for Water Membrane Filter - MCR M...
-
Best quality Membrane Bioreactor - MCR Membran...
-
Big Discount Fiber Membrane - UF Membrane Modu...
-
factory Outlets for Ultrafiltration Systems Wat...
-
Personlized Products Tubular Membrane Module -...
-
Good User Reputation for Mbr Treatment Plant -...