Factory Supply Stainless Steel Water Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Filter System , Mbr Treatment Plant , Membrane Industry , Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you.

Factory Supply Stainless Steel Water Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No.	Item	Output?Index
1	TSS	≤1mg/L
2	Turbidity	≤1
3	CODcr	Removal?rate?depends?on?the?bio-chemicalperformance?& designed?sludge?concentration(Instant?removal?rate?of?membrane?is?≤30% without bio-chemical?function)
4	NH3-H

Specifications

product-description1

Technical Parameters

Structure	Outside-in
Membrane?Material	Reinforced Modified?PVDF
Pore?Size	0.1 micron
Membrane?Area	30m2
Membrane?ID/OD	1.0mm/2.2mm
Size	1250mm×2000mm×30mm
Joint?Size	Φ24.5mm

Application Parameters

Designed?Flux	10~25L/m2.h
Backwashing?Flux	Twice the designed flux
Operating?Temperature	5~45°C
Maximum?Operating?Pressure	-50KPa
Suggested?Operating?Pressure	≤-35KPa
Maximum?backwashing?Pressure	100KPa
Operating?Mode	8/9min?on+2/1min?pause
Aeration?Mode	Continuous?Aeration
Aeration?Rate	4m3/h.piece
Washing?Period	Clean?water?backwashing?every?2~4h;?CEB?every?2~4 weeks;CIP?every?6~12 months.???????????*Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof?differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not? ?easy to foul.

Item	Value	Remark
PH	Operate: 5-9Wash: 2-12	Neutral?PH is good?for?bacteria?culture
Particle?Diameter	<2mm	Sharp?particles?will?scratch?membrane
Oil & Grease	≤2mg/L	High content will?affect?membrane?flux
Hardness	≤150mg/L	High content will?cause?fouling

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified?PVDF
Sealing Compound	Epoxy Resins?+ Polyurethane?(PU)
Housing	ABS

Product detail pictures:

Related Product Guide:

Based on domestic market and expand overseas business is our development strategy for Factory Supply Stainless Steel Water Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Albania, Guatemala, Sri Lanka, All our products are exported to clients in the UK, Germany, France, Spain, the USA, Canada, Iran, Iraq, the Middle East and Africa. Our products are well welcomed by our customers for the high quality, competitive prices and favorable styles. We hope to establish business relationship with all customers and bring more beautifu colors for the life.

Fiber Membrane