Factory source Membrana Uf - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo

Product Overview

MBR is a combination of membrane technology and bio-chemical? reaction? in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.

This product adopts reinforced modified PVDF material, which will not peel or break? during? backwashing,? meanwhile? it? has? good? permeable? rate, ?mechanical performance,? chemical? resistance? and? anti-fouling? ability.? ID? &? OD? of? reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.1 micron. ?Filtering? direction? is? outside-in,? that? is? raw? water,? driven? by? differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

●Treatment, recycle and reuse of industrial waste water;

●Treatment of refuse leachate;

●Upgrade and reuse of municipal sewage.

Filtration?Performance

Below? filtration ?effects? are? proved? according? to? the? use? of? modified? PVDF hollow fiber ultrafiltration membrane in different types of water:

Specifications

Size

Technical?Parameters:

Component?Material:

Using?Conditions

Proper?? pretreatments?? must?? be?? set ??when?? raw?? water?? contains?? a?? lot?? of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams? in? membrane tank when? necessary,? please? use alcoholic defoamer which is not easy to scale.

Application?Parameters: