Factory Free sample Membrane Separation Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf2860 Replacing Project – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Water Purifier , Uf In Filter , Water Filter For Drinking Water , Our team members are aim to provides products with high performance cost ratio to our customers, and the goal for all of us is to satisfy our consumers from all over the world.

Factory Free sample Membrane Separation Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf2860 Replacing Project – Bangmo Detail:

Applications

Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient	Effect
SS, Particles?> 1μm	Removal Rate?≥ 99%
SDI	≤ 3
Bacteria, Viruses	>?4 log
Turbidity	< 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description1

Technical Parameters

Filtering?Type	Outside-in
Membrane?Material	Modified?PVDF
MWCO	200K Dalton
Membrane?Area	52m2
Membrane?ID/OD	0.8mm/1.3mm
Dimensions	Φ225mm* 1860mm
Connector?Size	DN50 Clamping; Air?Inlet?– 10mm?air?pipe

Application Data

Pure?Water?Flux	8,000L/H?(0.15MPa, 25C)
Designed?Flux	40-120L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure	≤ 0.2MPa
Maximum?Transmembrane?Pressure	0.15MPa
Maximum?Backwashing?Pressure	0.15MPa
Air?Washing?Volume	0.1-0.15N m3/m2 .hr
Air?Washing?Pressure	≤ 0.1MPa
Maximum?Working?Temperature	45C
PH?Range	Working: 4-10; Washing: 2-12
Operating?Mode	Cross?Flow?or Dead End

Feeding Water Requirements

Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity	≤ 25NTU
Oil?&?Grease	≤?2mg/L
SS	≤ 20mg/L
Total?Iron	≤?1mg/L
Continuous?Residual?Chlorine	≤?5ppm
COD	Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters

Backwashing?Flow?Rate	100-150L/m2.hr
Backwashing?Frequency	Every?30-60min.
Backwashing?Duration	30-60s
CEB?Frequency	0-4?times per day
CEB?Duration	5-10min.
CIP?Frequency	Every 1-3 months
Washing?Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic?Pollution?Washing	0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing	1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material

Component	Material
Membrane	Modified?PVDF
Sealing	Epoxy?Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for Factory Free sample Membrane Separation Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf2860 Replacing Project – Bangmo , The product will supply to all over the world, such as: Senegal, Jersey, Bogota, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.

Cross Flow Membrane